PVC lamination film is a polyvinyl chloride film that is bonded onto a panel, sheet or profile to create its finished decorative surface. The market sells this same product family under several names — PVC foil, vinyl foil, PVC decoration film, PVC membrane — and that naming overlap is the first thing a buyer has to resolve. This guide explains what the film is, how it is specified, which substrates it is laminated onto, and what to verify before placing a bulk order.

It is written for importers, distributors, panel producers and procurement teams at the awareness and research stage, and it draws on two evidence sources: product data published by Haining Xihe Decoration Material Co., Ltd. (XHDeco), and publicly available supplier and market data on lamination films.

What PVC Lamination Film Is (Definition and Product Scope)

In its product catalogue, XHDeco classifies the product as a PVC film and, more precisely, as a lamination film and a PVC foil. The grade identified as LD-60139-9 is made of PVC material, is supplied in the wooden, marble and golden series, and is listed at a thickness of 0.1 mm on 700 m rolls. Its stated purpose is surface finishing for interior wall panels and ceiling panels, which places it in the decorative lamination segment rather than in packaging, masking or protective film.

That distinction matters commercially. A decorative lamination film is judged on how it looks after bonding and how it performs in service — cleaning, handling, moisture and time on the panel — not on how well it works as a removable protective mask.

The three components buyers are really specifying

• The PVC face. The visible layer. Thickness, colour series and surface finish are defined here.
• The bonding route. How the film attaches to the substrate: an adhesive applied during lamination, or an adhesive already carried by the film.
• The substrate. PVC laminate sheet, SPC, MDF, plywood, WPC, acrylic or metal sheet behave differently under the same film.

Publicly available supplier material for decorative PVC lamination film describes three adhesive routes: PVA glue for cold laminating, PUR glue for hot laminating, and pressure-sensitive adhesives as a separate category. The same source notes that adhesive selection varies with substrate, lamination process and application requirement. Another supplier describes its cold-lamination products as PVC film built with pressure-sensitive acrylic adhesive. The adhesive is therefore not an accessory to the film; it is part of the specification.

Why PVC Film Alone Is a Weak RFQ

The practical problem at the research stage is vocabulary. When an inquiry says only PVC film, suppliers quote whatever their own catalogue calls PVC film, and the quotations are rarely comparable. Film sold as flat-lamination film, profile wrapping film, vacuum forming film, PVC panel film, PVC sheet film and PVC self-adhesive film can differ in thickness by several times, in roll format, and in whether an adhesive layer is already present.

Supplier-published numbers show the spread — and also why they must never be averaged. One supplier lists decorative PVC lamination film at 0.12 mm to 0.45 mm thickness, with widths of 1220 mm and 1260 mm and roll lengths of 100 m to 400 m, and finishes including high gloss, matte, super matte and soft-touch. A UV-cut lamination film product page lists 80 µm PVC with acrylic adhesive. A cold-lamination floor graphic range is listed at 0.18–0.22 mm and 0.20 mm. A clear rigid PVC film page lists 0.08–0.80 mm with a maximum width below 1400 mm.

Industry Background: Where the Volume Sits

The lamination films market covers PVC, PET and BOPP film types together. According to DataM Intelligence, that market reached USD 6,842.11 million in 2024 and is projected to reach USD 11,630.04 million by 2032. The same research places Asia-Pacific at a 36.87% revenue share in 2024, the largest regional block.

For a buyer, the structural reading is simple: the supply base and a large part of the demand base sit in the same region, and most sourcing conversations for decorative PVC film run through Asian manufacturers.

Downstream demand comes from the panel and furniture industry rather than from one end product. One supplier's application description names PVC laminate sheet, SPC, bamboo charcoal fiber panel, carbon crystal panel, acrylic sheet, aluminium or GI sheet, plywood, MDF and WPC as target substrates. XHDeco's own product data describes interior wall panels and ceiling panels as the typical application, supported by adhesive sheets and lamination solutions for panel decoration.

On the supplier side, industry news coverage identifies Zhejiang Hailide Film New Material Co., Ltd. as a major Chinese manufacturer of industrial-scale calendered and laminated PVC materials, which is useful context for the industrial end of the market. Mid-sized specialty producers operate alongside such industrial-scale players and typically compete on customization, pattern variety and order flexibility rather than on tonnage.

The Solution: Matching Film, Process and Substrate

XHDeco manufactures in Haining, Zhejiang, China, a known base for decorative building materials. The company was established in 2016 and integrates R&D, production and export of decorative wall-cladding materials. Its product range covers PVC wall panels, ASA co-extruded exterior cladding, PVC decorative film, WPC panels, decorative mouldings and PVC lamination film. Further detail is published on the XHDeco official website.

Four capability points in the company's published data are directly relevant to a film buyer:

• Production lines. Extrusion, lamination and surface treatment lines operate in the same facility, within a 6,000 m² manufacturing area, with approximately 50 staff.
• Development capacity. An R&D team of 8 engineers handles size, pattern and colour development work.
• Output. Annual production capacity is stated at 6000w units, supporting mass production orders alongside customized sizes, wood-grain patterns and colour options.
• Market experience. Export accounts for roughly 70% of total sales, with main markets in Southeast Asia (Indonesia, Philippines, Malaysia), the Middle East and South America.

On compliance, the company states that its products have passed relevant tests and are accepted by distributors, wholesalers and project clients across Southeast Asia, and that the factory holds SGS test reports covering safety and formaldehyde/fire-related testing. The same documentation notes that exact grades and suitable environments need to be confirmed with the customer for each project. That qualification matters: a test report is only meaningful when the film construction, substrate and application match the tested configuration.

Step-by-Step: How to Specify a PVC Lamination Film

Use Cases: Where Decorative PVC Film Is Used

The application base for PVC lamination film is broad because the film is a surface solution rather than a finished product.

• Interior wall panels. XHDeco lists interior wall panel surface finishing as a typical application scenario for its PVC film. The wider wall and ceiling range uses stainless steel buckles, screws and adhesive sheets as matching installation accessories, and the panels can be installed directly onto rough walls.
• Ceiling panels. The same film is specified for ceiling panel surface finishing, where moisture resistance and low maintenance are the usual selection drivers. XHDeco describes its PVC decorative panels and film as lightweight, waterproof, moisture-proof and wear-resistant, with low maintenance cost.
• Furniture and interior fit-out. The product data lists the film as intended for the manufacturing industry, and supplier application lists include furniture surfaces through substrates such as MDF and plywood.
• Plywood, MDF and WPC boards. These are among the substrates named in supplier application material, which is why flat-lamination film formats are standard in this segment.
• SPC, acrylic and metal sheet. Supplier material also lists PVC laminate sheet, SPC, bamboo charcoal fiber panel, carbon crystal panel, acrylic sheet and aluminium/GI sheet among target substrates.
• Residential, commercial, hotel and retail renovation. XHDeco's application data covers residential and commercial spaces, hotels, retail and renovation projects, indoors and in selected exterior applications under normal conditions.

Comparison Table: Film Terms and What They Usually Describe

Listed examples are supplier-published figures for the named products. They are not comparable industry benchmarks and should not be combined across rows.

Substrate-to-specification table

Frequently Asked Questions

Conclusion: What to Do Next

PVC lamination film is a simple product with a complicated vocabulary. The buying decision becomes manageable once the specification is broken into six items: substrate, lamination process and adhesive route, thickness qualified within your own product family, surface finish, roll format, and colour or pattern requirement. Compliance documentation then needs to be matched to the exact construction, and a sample must be validated on your own line before bulk volume is committed.

For buyers sourcing from Asia, the region accounts for the largest share of the global lamination films market, and mid-sized producers such as XHDeco compete on customization, pattern range and order flexibility. Export accounts for roughly 70% of XHDeco's sales, with established distribution across Southeast Asia, the Middle East and South America, and a facility combining extrusion, lamination and surface treatment under one roof.