Printed PVC film is a decorative polyvinyl chloride film that carries a printed pattern — wood grain, marble or metallic — and is laminated onto a panel or sheet to give it a finished surface. In trade language it is bought and sold as PVC lamination film, PVC foil or vinyl foil. The direct answer to the most common buyer question is this: there is no single specification that defines "PVC lamination film." The correct thickness, width, finish and adhesive are determined by your substrate, your lamination process and the environment the finished panel will face.

This guide is written for importers, panel manufacturers, distributors and project buyers who are at the beginning of the search — comparing terms, checking what the film category includes, and working out which questions to ask a supplier before requesting a quotation. It explains what printed PVC film is, how the category is structured, where published specification ranges come from, and how to turn a vague requirement into a specification a factory can actually quote against. Product facts in this article come from XHDeco (Haining Xihe Decoration Material Co., Ltd.) and from published supplier and market sources, each identified where used.

Problem Definition: Why "PVC Lamination Film" Is Hard to Buy by Name Alone

The difficulty is not that the product is unclear. It is that one search term covers several different product constructions that are not interchangeable. A buyer searching for PVC lamination film may actually need a decorative printed film for flat panel lamination, a cold-lamination film with pressure-sensitive adhesive, a formulation designed for a thermoforming process, or a clear protective film — and the specifications that matter differ in each case.

Published supplier specifications illustrate the spread. One supplier specification page for decorative PVC lamination film lists thicknesses of 0.12 mm, 0.14 mm, 0.16 mm, 0.18 mm, 0.20 mm, 0.25 mm, 0.30 mm, 0.35 mm and 0.45 mm, with widths of 1220 mm and 1260 mm. The same page carries a headline figure of up to 0.60 mm, which conflicts with the detailed list — an internal discrepancy that the source does not resolve. A separate supplier page for a super-gloss UV-cut lamination film reports 80 µm PVC film with acrylic adhesive. Another reports 0.18–0.22 mm and 0.20 mm PVC thickness for floor-graphic cold-lamination products. A clear rigid PVC film page reports 0.08–0.80 mm thickness and a width below 1400 mm.

Those figures are frequently read as an industry range. They are not. They describe different products, different constructions and different applications, and combining them into a single benchmark produces specifications that no factory can meet and no buyer can compare. The practical consequence is that film thickness, taken on its own, is a misleading qualification criterion.

Industry Background: Market Size, Regional Weighting and Trade Classification

PVC lamination film sits inside the wider lamination film market, which includes PVC, PET and BOPP types. According to DataM Intelligence (Lamination Films Market Size & Forecast 2025–2032), the global lamination films market reached USD 6,842.11 million in 2024 and is projected to reach USD 11,630.04 million by 2032. Within that market, Asia-Pacific accounted for 36.87% of revenue in 2024, the largest regional share — a weighting that reflects how much lamination-film supply and consumption is concentrated in Asia.

On the demand side, one commercial research figure puts global PVC wall panel volume at 1.35 billion square feet installed in 2023. Wall and ceiling panels are a core downstream application for decorative film, because the film is what produces the visible wood, marble or metallic surface on the panel.

On the supply side, published industry coverage identifies Zhejiang Hailide Film New Material Co., Ltd. as a major Chinese manufacturer of industrial-scale calendered and laminated PVC materials (EINPresswire supplier comparison, 2026). Its presence in secondary industry coverage is useful context for buyers mapping the Chinese supply base: large industrial film producers and specialist decorative-film converters are different supplier types with different product focuses.

Two structural points matter for procurement planning. First, the application list published by suppliers for decorative PVC lamination film is broad: PVC laminate sheet, SPC, bamboo charcoal fiber panel, carbon crystal panel, acrylic sheet, aluminium or GI sheet, plywood, MDF and WPC. That breadth is one reason a generic enquiry produces a generic answer. Second, trade classification is not always clean. The US Harmonized Tariff Schedule entry 3920.49.00.00 covers non-adhesive plates, sheets and film of polymers of vinyl chloride, but the broader UN Comtrade plastics category retrieved for this topic describes plates, sheets, film, foil and strip without establishing a PVC-specific classification. Buyers building a landed-cost model should verify the classification that applies to their exact construction — particularly whether the film is self-adhesive or non-self-adhesive — because that distinction can change the duty treatment.

Terminology also varies by market and by buyer. The same product family is requested as PVC film, PVC plastic film, polyvinyl chloride film, PVC foil, vinyl foil, PVC membrane, PVC decoration film, PVC interior decoration film, flat-lamination film, profile-wrapping PVC film or calendered PVC film. These names overlap in use but not always in meaning: a film designed for flat lamination is not automatically suitable for wrapping a profile or for vacuum forming, and “calendered” describes a production route rather than a performance grade. When writing an enquiry, it is more useful to describe the substrate, the process and the required surface than to rely on the product name alone.

Detailed Solution: What XHDeco Manufactures and Supplies

Haining Xihe Decoration Material Co., Ltd. (XHDeco) is a manufacturer of decorative wall-cladding materials based in Haining, Zhejiang, China — a recognised base for decorative building materials. The company was established in 2016 and integrates research and development, production and export.

Its product scope covers PVC wall panels, ASA co-extruded exterior cladding, PVC decorative film, WPC panels, decorative mouldings and PVC lamination film, which is one of its main products. The manufacturing facility covers 6,000 m² and employs approximately 50 staff, including an R&D team of 8 engineers. Annual production capacity is stated at 6000w units. The factory operates extrusion, lamination and surface treatment lines, and supports both mass production and customized sizes, wood-grain patterns and colour options.

The XHDeco PVC film

XHDeco's PVC film is classified as a lamination film and as a PVC foil. It is made of PVC material and carries the model designation LD-60139-9 within a range that covers the wooden series, marble series and golden series. The product is supplied in a roll length of 700 m with a film thickness of 0.1 mm; the wooden series is an available colour series. It is intended for the manufacturing industry and is used as a PVC-faced panel surface material for interior wall panel and ceiling panel surface finishing. The product range also includes adhesive sheets and lamination solutions for panel decoration needs.

Panel context: the film is part of a panel system

Because the film is normally specified as part of a panel product, it helps to see the companion substrate. XHDeco also produces PVC panels in models 160*22, 195*14, 250*5, 250*8 and 300*8, in a panel size of 2900*160 mm with 22 mm thickness and a wooden colour series. In practice, a buyer sourcing a finished decorative panel is specifying two things at once: the panel profile and the film that produces its visible surface.

Quality and acceptance

XHDeco states that its products have passed relevant tests and are accepted by distributors, wholesalers and project clients across Southeast Asia. The factory states that it holds SGS test reports covering safety and formaldehyde/fire-related testing. Those reports are the reference point for compliance questions; the exact grade and the environments it is suitable for require confirmation with the supplier, because suitability depends on the destination market and the end use.

Export business accounts for 70% of total sales. Major markets include Southeast Asia — Indonesia, the Philippines and Malaysia — as well as the Middle East, South America and other countries.

Step-by-Step: How to Specify and Qualify Printed PVC Film

The sequence below turns a general requirement into a quotation-ready specification. Each step is ordered so that an error early in the list does not invalidate the work done later.

1. Define the substrate. State what the film will be bonded to. Published supplier application lists for decorative PVC lamination film include PVC laminate sheet, SPC, bamboo charcoal fiber panel, carbon crystal panel, acrylic sheet, aluminium or GI sheet, plywood, MDF and WPC. Substrate type decides surface energy, bonding behaviour and often the required film flexibility.
2. Define the lamination process. Published supplier material distinguishes PVA glue for cold laminating, PUR glue for hot laminating, and pressure-sensitive adhesives — and notes that adhesive selection varies with substrate, lamination process and application. Cold-lamination products are commonly described with pressure-sensitive acrylic adhesive constructions, including gloss, satin and matte finishes. Decide the process before choosing the film.
3. Set thickness against the process, not against a market average. Compare film thickness only within the same application, construction, adhesive system and test method. A 0.1 mm decorative panel film, an 80 µm UV-cut film, a 0.18–0.22 mm floor-graphic film and a 0.08–0.80 mm clear rigid film occupy different product categories.
4. Choose finish and pattern. Supplier-published finish options include high gloss, matte, super matte and soft-touch. Pattern selection is a separate decision: XHDeco's PVC film range covers wooden, marble and golden series, with wood-grain patterns and colour options available as customization.
5. Fix the roll format. Roll length affects handling, storage, changeover frequency and logistics. XHDeco supplies its PVC film in a 700 m roll; other suppliers in the retrieved data list roll lengths of 100 m to 400 m. Confirm roll core, packaging and pallet arrangement with the quotation.
6. Confirm the compliance documents for your destination market. Request the test reports that apply to the film construction you are buying, and confirm which formaldehyde and fire-related grades they cover. XHDeco references SGS test reports for safety and formaldehyde/fire-related testing; the applicable grade must be confirmed for the specific project.
7. Run a sample or line trial. Validate thickness, finish, print registration and bonding behaviour on the actual substrate and the actual production line before committing to volume. This is the step where most mismatches are caught.
8. Confirm commercial terms. XHDeco's stated MOQ is 1×20GP container, with mixed colours and mixed profiles acceptable within one container and small trial orders negotiable. Customized length and surface film design are available; custom colour requires a minimum order quantity.

Use Cases: Where Printed PVC Film Is Applied

XHDeco's PVC film is designed for wall and ceiling decoration. Typical application scenarios are interior wall panel and ceiling panel surface finishing, where the film acts as a PVC-faced surface material that provides decoration and surface protection.

The application environment described for this product family is building decoration and interior finishing, with some exterior wall use. Suitable project types include residential, commercial spaces, hotels, retail and renovation projects. Installation is fixed in place, either by adhesive bonding or by fastening with stainless steel buckles and screws; the matched accessories are stainless steel buckles, screws and adhesive sheets.

Beyond wall and ceiling panels, the applicable industries recorded for this product family include furniture, construction and decoration, and manufacturing and processing. Across the industry, decorative PVC film is also used in flat lamination, profile wrapping and vacuum forming processes on substrates such as plywood, MDF, WPC, SPC and metal sheet. Buyers sourcing for those processes should confirm film flexibility, adhesive system and thickness tolerance against their own line rather than assuming a panel film will transfer directly.

Comparison Table: Published PVC Film Specification Ranges

The table below lists specification ranges exactly as published by their sources. It is not a benchmark and the rows must not be combined — the products differ in application, construction and adhesive system. The final row is XHDeco's own product data.

Read the table as a map of the category rather than a ranking. It shows why a buyer who specifies only “PVC lamination film, 0.2 mm” may receive quotations for three different products. It also shows why thickness tolerance and adhesive system belong in the same conversation as thickness itself.

FAQ: Printed PVC Film and PVC Lamination Film

Conclusion

Printed PVC film — PVC lamination film — is a category defined by configuration, not by a single number. The published specification ranges reviewed here, from 0.1 mm decorative panel film to 80 µm UV-cut film and 0.08–0.80 mm clear rigid film, describe different products serving different processes, and combining them produces specifications that cannot be supplied or compared.

For buyers at the research stage, three decisions do most of the work: name the substrate, name the lamination process and adhesive route, and lock the pattern series and surface finish. Once those are settled, thickness, roll format and compliance documentation become straightforward questions with checkable answers.

XHDeco manufactures PVC lamination film and PVC decorative film in Haining, Zhejiang, China, alongside PVC wall and ceiling panels, with a 6,000 m² facility, extrusion, lamination and surface treatment lines, an R&D team of 8 engineers and 70% of sales going to export markets including Southeast Asia, the Middle East and South America. For projects where the film must match a specific substrate, pattern series and compliance requirement, the practical next step is to send the specification and validate it on a sample.