XHDeco (Haining Xihe Decoration Material Co., Ltd.): PVC Lamination Film Manufacturer Profile and Capability Review

XHDeco is the operating name of Haining Xihe Decoration Material Co., Ltd., a manufacturer established in 2016 in Haining, Zhejiang, China, that integrates research and development, production and export of decorative wall-cladding materials. Its portfolio covers PVC lamination film, PVC wall and ceiling panels, ASA co-extruded exterior cladding, WPC panels and decorative mouldings. Around 70% of total sales are exported, with main markets in Southeast Asia (Indonesia, Philippines, Malaysia), the Middle East and South America.

This review is written for importers, distributors, panel producers and project buyers who are screening XHDeco as a possible PVC lamination film supplier. It answers three questions: what the company actually manufactures, what its published capability figures mean in procurement terms, and where the published evidence ends and independent verification has to begin. Every company-specific figure below comes from XHDeco's own published material; every third-party figure is attributed to its source.

Why PVC Lamination Film Suppliers Are Difficult to Compare

The first obstacle is terminology. Buyers search for PVC film, PVC plastic film, PVC decoration film, PVC panel film, PVC ceiling film, printed PVC film, PVC sheet film, PVC film for wall panel, PVC furniture film, vacuum forming PVC film, PVC film for plywood, PVC membrane, PVC interior decoration film, flat-lamination film, profile wrapping PVC film, polyvinyl chloride film, calendered PVC film, PVC foil, vinyl foil and PVC self-adhesive film. Suppliers use the same words for products that are not interchangeable. An 80 micrometre UV-cut film, a 0.20 mm pressure-sensitive cold-lamination film for floor graphics and a decorative panel film supplied in 700 m rolls are all marketed as "PVC film", yet each is qualified against a different substrate, a different lamination line and different test criteria.

The second obstacle is that publicly listed specifications are supplier-reported rather than benchmarked. Retrieved supplier listings for decorative PVC lamination film show thicknesses of 0.12–0.45 mm and widths of 1,220 mm and 1,260 mm, and roll lengths commonly listed at 100–400 m per roll. One such page states a maximum of 0.60 mm in its headline while its own detailed thickness list ends at 0.45 mm — an internal discrepancy that has to be resolved before any maximum-thickness claim can be relied on. Clear rigid PVC film is listed separately at 0.08–0.80 mm with widths below 1,400 mm, and cold-lamination floor graphic film at 0.18–0.22 mm. These are different segments; they cannot be merged into a single "industry range".

The third obstacle is commercial. A price per roll or per kilogram is meaningless until the substrate, thickness, finish, adhesive system, roll dimension and packaging method are fixed. This is why a supplier evaluation has to be built on product-family-level data plus verifiable process and compliance evidence, instead of one headline specification or one quoted price.

Industry Background: Where PVC Lamination Film Sits in the Decorative Materials Market

The wider lamination film category, which includes PVC alongside PET and BOPP types, reached USD 6,842.11 million globally in 2024 and is projected to reach USD 11,630.04 million by 2032, according to DataM Intelligence's lamination films market forecast (2025–2032). Asia-Pacific accounted for 36.87% of that revenue in 2024.

Regional concentration matters for sourcing strategy. When more than a third of global lamination film revenue is generated in Asia-Pacific, buyers looking for volume and price efficiency naturally concentrate their supplier searches in that region — which is also why supplier discovery is crowded and why differentiation has to come from evidence rather than from claims. On the demand side, one industry estimate puts PVC wall panel installation volume at 1.35 billion square feet globally in 2023, indicating a large downstream surface area that requires film finishing, edge treatment and matching accessories.

Technically, PVC lamination film selection is application- and substrate-dependent. Supplier documentation for the category lists use on PVC laminate sheet, SPC, bamboo charcoal fibre panel, carbon crystal panel, acrylic sheet, aluminium or GI sheet, plywood, MDF and WPC, and identifies PVA glue for cold laminating, PUR glue for hot laminating and pressure-sensitive adhesives as the main bonding routes. The practical implication is straightforward: an RFQ that specifies substrate, lamination method, thickness, finish, adhesive system and required roll dimensions will produce comparable quotations, while an RFQ for "PVC film" will not.

For customs and landed-cost planning, finished non-adhesive PVC plates, sheets, film and foil are commonly referenced under Harmonized Tariff Schedule heading 3920.49.00.00 (US International Trade Commission). Self-adhesive constructions may be classified differently, so the classification should be confirmed with a customs broker against the actual construction of the film being imported.

Company Overview: XHDeco at a Glance

Haining Xihe Decoration Material Co., Ltd. was established in 2016 and is located in Haining, Zhejiang, China, a well-known base for decorative building materials. The company integrates research and development, production and export of decorative wall-cladding materials, and sells through both bulk export and project supply. Its published profile states that products have passed relevant tests and are accepted by distributors, wholesalers and project clients across Southeast Asia.

Core Products and Solutions

PVC Lamination Film: Model LD-60139-9 and Series Range

XHDeco's PVC film is classified as a lamination film and PVC foil. The named model is LD-60139-9, and the model range covers a wooden series, a marble series and a golden series, all produced from PVC material. Published parameters for the range are a roll size of 700 m and a thickness of 0.1 mm, with wooden as the referenced colour series. The film is designed for lamination onto panels used for wall and ceiling decoration, and applies to panel lamination lines in interior panel production. The declared application industry is manufacturing.

Read in procurement terms, this positions the product as a decorative surface material rather than a protective tape or an optical film: the buyer supplies the substrate — for example a PVC wall panel, a WPC board or a plywood sheet — and the film supplies the visible finish. That distinction determines which thickness, adhesive route and roll width will actually run on the buyer's line.

PVC Wall and Ceiling Panels

Alongside the film, XHDeco produces PVC panels marketed as wall panels, ceiling panels, interior wall panels, UV sheets and WPC. Published profile models include 160*22, 195*14, 250*5, 250*8 and 300*8, with a referenced panel size of 2,900 × 160 mm and a thickness of 22 mm in the wooden colour series. Installation is described as fixed mounting — either adhesive bonding or fastening with stainless steel buckles and screws — with stainless steel buckles, screws and adhesive sheets offered as matched accessories.

For a distributor, this matters commercially: film, panel and accessory can be specified as one system, which reduces the risk of colour and finish mismatch between the film surface and the panel edge, and simplifies mixed-container loading.

Adjacent Systems: ASA Co-Extruded Cladding, WPC Panels and Decorative Mouldings

The wider catalogue adds ASA co-extruded exterior cladding, WPC wall panels and decorative mouldings, for both interior and exterior projects. These are adjacent to PVC lamination film rather than substitutes for it, and they support the scenario where a buyer sources interior surface finishing and exterior cladding from a single supplier.

Customization and Made-to-Order Support

XHDeco's published capability statement covers mass production as well as customized sizes, wood-grain patterns and colour options. Custom colour requires a minimum order quantity. Mixed colours and mixed profiles are acceptable within one container. It is worth stating precisely what the published material does and does not document: it describes customised dimensions, wood-grain patterns and colours, but it does not publish a separately documented OEM or ODM programme with its own terms, tooling policy or labelling rules. Buyers who need private-label packaging, bespoke embossing or custom profile development should treat that as a project-specific negotiation and confirm tooling, minimum quantities and lead time in writing.

Manufacturing, R&D, Quality Control and Export Capability

Manufacturing Footprint and Equipment

The manufacturing facility covers 6,000 square metres and employs approximately 50 staff, with annual production capacity stated at 6000w units. The factory is equipped with extrusion, lamination and surface treatment lines — the three process groups that determine whether a supplier can both extrude panel profiles and finish film-laminated surfaces in-house.

Research and Development

The R&D team consists of 8 engineers. In practice, an eight-engineer team at a facility of this scale supports the customisation that XHDeco advertises — customised sizes, wood-grain patterns and colour options — rather than long-horizon material science. Buyers with demanding specification work, such as a new finish system, a different substrate or a specific forming process, should therefore expect to run joint trials and should plan for sample iterations in the project timeline.

Quality Control

Published quality control runs through raw-material inspection, production monitoring and pre-shipment testing. The company states that its products have passed relevant tests and that it holds SGS test reports covering safety and formaldehyde- and fire-related testing. It also states explicitly that fire resistance and formaldehyde safety should be referred to those reports, and that the exact grades and the environments they suit must be confirmed with the customer.

Global Supply and Service Model

Export accounts for about 70% of total sales, with Southeast Asia (Indonesia, Philippines, Malaysia), the Middle East and South America named as main markets, and acceptance by distributors, wholesalers and project clients reported across Southeast Asia. Stated commercial terms include stable lead time, competitive FOB pricing and flexible payment terms for bulk orders. The company also invites customers to visit the factory to review capability before commitment.

Market Assessment, Industry Position and Recognition

XHDeco's stated market position is that of a mid-sized, export-oriented decorative materials manufacturer serving distributors, wholesalers and project clients, with roughly 70% of output leaving China. Its buyer mix — channel partners rather than end consumers — means success depends on repeat container volume, colour consistency between batches and reliable lead time more than on one-off product novelty.

Third-party event listings place XHDeco among exhibitors presenting PVC/WPC wall panels and PVC decorative films at international fairs such as Archidex and the Erbil International Fair, which is consistent with a channel-led sales model concentrated on Southeast Asia and the Middle East.

For context on the competitive field, a 2026 industry supplier comparison identifies Zhejiang Hailide Film New Material Co., Ltd. as a major Chinese manufacturer for industrial-scale calendered and laminated PVC materials. The material retrieved for this review does not establish that company's decorative film specification, capacity or export mix, so no capability ranking is implied in either direction.

Comparison: Supplier Profile and Film Specification Variables

At specification level, the more useful comparison is between product segments rather than between suppliers, because thickness and finish values are only meaningful within the same construction and application.

Step-by-Step: How to Specify and Qualify a PVC Lamination Film Order

1. Define the substrate first. Plywood, MDF, WPC, PVC panel, SPC or metal sheet each impose different bonding and forming requirements. The substrate determines the film construction before any price discussion.
2. Fix the lamination route and adhesive system. PVA cold laminating, PUR hot laminating and pressure-sensitive adhesive are not interchangeable; the choice has to match the buyer's line and the final application.
3. Set thickness and roll dimensions inside one product segment. Compare only within the same construction and application. For XHDeco's LD-60139-9 range, the published reference is 0.1 mm thickness on a 700 m roll.
4. Choose the pattern or colour system. Wooden, marble and golden series are the published reference families; custom colours require a minimum order quantity, so confirm whether your design falls inside the standard series or a custom run.
5. Bundle panels and accessories where relevant. Ordering panels, stainless steel buckles, screws and adhesive sheets together reduces colour and finish mismatch risk and simplifies container loading.
6. Validate with samples on your own equipment. Test adhesion, surface appearance and forming behaviour on the actual line before committing to a container order, and record the reference sample for batch comparison.
7. Confirm commercial terms in writing. MOQ is 1×20GP container; mixed colours and mixed profiles are acceptable within one container; small trial orders are negotiable. FOB pricing, payment terms and lead time should be stated per order.
8. Align compliance documents with the exact model. Request the current SGS test report for the specific film or panel model and confirm that the fire and formaldehyde data matches your destination market's requirements.

Use Cases: Where XHDeco Film and Panels Fit

Building decoration and interior finishing is the primary use case. XHDeco panels and film are intended for interior wall and ceiling surfaces in residential, commercial, hotel, retail and renovation projects, where a decorative surface also provides protection to the base material. The published working condition is normal indoor use, with some exterior wall use in the wider cladding range.

Manufacturing is the second use case: the film is intended for the manufacturing industry and applies to panel lamination lines producing interior panels, which places XHDeco film in the supply chain for furniture surfaces, wall panel production and plywood- or MDF-based decorative boards. Where the substrate is plywood, MDF, WPC or a profile, the substrate list published for the category gives a useful reference point for compatibility discussions.

A third use case is humid interior environments such as kitchens, bathrooms and utility areas, where PVC decorative panels and film are used because they are lightweight, waterproof, moisture-proof and wear-resistant, with low maintenance requirements. Installation can be direct onto smooth or rough walls using adhesive or mechanical fastening with stainless steel buckles and screws.

For projects requiring a single specification across a large area, the combination of film, panel and decorative moulding from one supplier also reduces the number of colour batches a buyer has to reconcile on site.

Frequently Asked Questions

Are XHDeco's PVC lamination film and PVC panels tested for safety, formaldehyde and fire performance?

XHDeco states that its products have passed relevant tests and that it holds SGS test reports covering safety and formaldehyde- and fire-related testing. The company also states that fire resistance and formaldehyde safety must be referred to those reports, and that the exact grades and the environments they are suitable for need confirmation with the customer. For procurement, the practical rule is to request the current report version for the exact model, thickness and colour series you intend to order, and to check whether your destination market requires additional conformity documentation.

Can XHDeco customise PVC lamination film colours, wood-grain patterns and sizes?

Yes — XHDeco supports mass production as well as customised sizes, wood-grain patterns and colour options. The published film model range covers a wooden series, a marble series and a golden series, with LD-60139-9 as the named model. Custom colour requires a minimum order quantity, and mixed colours and mixed profiles are acceptable within one container. The published capability statement describes custom dimensions, patterns and colours rather than a separately documented OEM or ODM programme with its own tooling and labelling terms, so private-label or bespoke embossing projects should be confirmed as a project-specific agreement.

What is the minimum order quantity for XHDeco PVC film and PVC wall panels?

The published minimum order quantity is 1×20GP container. Mixed colours and mixed profiles are acceptable within one container, and small trial orders are negotiable. Because custom colours carry their own minimum quantity, the effective order size depends on how much of the container is standard series and how much is custom — a point worth clarifying before requesting a quotation.

Can I test a sample before placing a bulk order?

XHDeco's published supply terms address MOQ, mixed loading and trial orders rather than a separate sample policy, so sample and colour-chip requests are handled case by case. A practical validation approach is to request film and panel samples from the exact model and colour series you plan to order — for example PVC film LD-60139-9 in the wooden series — and to test them on your own substrate and lamination line before confirming a container order. Keep the approved sample as the reference for subsequent batch comparison.

What lead time, pricing basis and payment terms does XHDeco offer?

XHDeco states stable lead time, competitive FOB pricing and flexible payment terms for bulk orders. Specific lead time and price are confirmed per order against model, thickness, colour series and order quantity, since custom colours and mixed-profile loading affect both. To move forward with an evaluation, you can download the company profile for the full product and contact overview, or send your specification — substrate, lamination route, thickness, finish, roll dimensions and target quantity — directly to XHDeco at 834832100@qq.com or +86 18858307144 for a quotation.

Conclusion: Industry Positioning, Procurement Value and Outlook

XHDeco occupies a specific and defensible position in the PVC lamination film supply landscape: a mid-sized, export-oriented manufacturer in Haining, Zhejiang, with a 6,000 m² facility, extrusion, lamination and surface treatment capability in-house, an eight-engineer R&D team, roughly 70% of sales exported, and a customer base concentrated among distributors, wholesalers and project clients in Southeast Asia, the Middle East and South America. It is not positioned as an industrial-scale commodity film producer; it is positioned as a decorative materials supplier that can deliver film, panel and accessory as one specification.

The procurement value follows from that position. Buyers get product-family clarity (PVC lamination film LD-60139-9 in wooden, marble and golden series), a documented installation system with matched accessories, customisation in sizes, patterns and colours subject to a minimum quantity, and a container-based commercial model with mixed colours and profiles permitted. Against that, buyers should apply normal discipline: company-reported capacity figures should be verified through audit or trade references, test reports should be matched to the exact model and batch, and specification comparisons should be made only within the same product segment.

Looking forward, the direction of the market supports the category. Global lamination film revenue is projected to grow from USD 6,842.11 million in 2024 toward USD 11,630.04 million by 2032, and Asia-Pacific already holds 36.87% of that revenue — the same region where XHDeco manufactures and sells. For a supplier of this size, the competitive question is less about entering the market than about converting channel relationships into repeat, specification-driven volume with consistent colour and reliable lead time. For buyers, the corresponding question is whether a supplier with in-house lamination, matched accessories and willingness to customise is a better long-term fit than a trading intermediary with no line of its own. That is a question the sample and the audit answer, not the brochure.

Next Step: Sample, Quotation or Factory Visit

If PVC lamination film or PVC wall and ceiling panels are on your sourcing list, start with the exact specification: substrate, lamination route, thickness, finish, roll dimensions and target quantity. XHDeco can issue a quotation on that basis and arrange sample review before a container order.

Download the company profile: Xihe Company Profile (PDF)

Website: xihe-decoration.com
Email: 834832100@qq.com
Tel / WhatsApp: +86 18858307144 (contact: Ealine)
Address: 16th building, No.1 Weiye Road, Yuanhua Town, Haining City, Zhejiang, China